5
B.
Blender
1.
Make sure the position of the switch is in stop state (the switch shall be in
“0”
position)
2.
Put sealing ring into blade unit, secure and fasten glass jug into blade unit
(clockwise for fastening, and counter clockwise for loosening), put the jar cover
and the measuring cup on it.
3.
Secure the blade unit clockwise into the motor base with your hand (counter
clockwise for loosening), do not holding the glass jug handle as per above photo
for disassembling. Otherwise, the glass jug will leave blade unit and make food in
the glass jug leak out.
C.
Chopper
1.
Secure chopper cup into chopper unit (clockwise).
2.
For meat to be processed, remove tendon, bones and skin and wash cleanly. Cut
into small piece of 2-centimetre squares, every time put 200g into the chopper.
Put the chopper cup cover on the chopper, mount them on the motor base
according to the position shown in the diagram, turn clockwise, and press the
chopper cup tightly with your hand. Turn on the button switch for chopping.
3.
Before chopping, pouring some edible oil or flavouring into the meat will produce
better results.
Note: If rotating speed slows down abruptly due to too much meat quantity or
tendon entangling blade. Please turn off the appliance, cut off the power supply and
adjust the meat quantity or remove the tendon from the meat.
