Elba EJE-J7580(SS) Скачать руководство пользователя страница 5

 

PREPARATION OF FRUITS AND VEGETABLES 

1.

 

Wash the fruits and vegetables that need to be extracted.  

2.

 

Peel fruits that have inedible skins such as citrus fruits, pineapples, melons, papayas, 
etc.  

3.

 

Pit all fruits with seeds such as peaches, nectarines, cherries and etc.  

4.

 

Fruits and vegetables such as apples, carrots and cucumbers will not need to be cut 
into small pieces. Unless the fruits or vegetables are too big to be fit into the feeder 
tube, slice it before starting to extract. 

 

OPERATING THE APPLIANCE  

Juicing 

1.

 

Before using, please make sure the control switch of the motor base in stop state. In 
case assembly is not completed, starting the appliance accidently can be avoided to 
prevent unnecessary injury to persons or damage to property.  

2.

 

Before  juicing,  make  sure  stainless  steel  grater  and  filter  and  rotor  clutched  into 
position,  and  no  hard  contact  between  stainless  steel  grater  and  filter  and  juicer 
cover. Secure the locking handle into the cover slot.  

3.

 

Turn  on  power  supply,  press  switch  to  let  the  appliance  run no-load  for  5  sec.  Put 
prepared  vegetable  or  fruit  into  feeder  tube  and  press  with  the  food  pusher  with 
evenly, hard and slowly. To extract the maximum amount of  juice always push the 
food pusher down slowly.  

4.

 

When  pressing  food  with  the  food  pusher,  force  shall  be  applied  evenly.  Do  not 
apply sudden force, otherwise juicing effect will be reduced.  

5.

 

When  juicing  processing  is  operating,  keep  the  spout  with  anti-drip-proof  opening 
with down to allow the juice to come out. When juicing has finished, the spout can 
be raised to prevent any residual juice from coming out. 

Note:  

This appliance is designed with button switches of ‘0’ grading, ‘I’ grading, and ‘II’ grading (‘O’ 
for stop, ‘I’ for weak grading, and ‘II’ for strong grading). For juicing, select strong grading 
and  after  using  for  1  min,  stop  for  1  min,  then  use  again.  After  the  above  operation  is 
performed for three time, stop for 15 min and do not operate until the motor is cool down. 
In this way, the lifespan of this appliance will be prolonged.  

 

 

 

 

Отзывы: