Elba EJE-9811A, Руководство пользователя, Страница: 15 / 16

14
CLEANING AND MAINTENANCE
1. Turn the control switch to the speed ‘0’ position and wait for the motor to stop operating.
2. Unplug the plug from the wall outlet.
3. Disassemble the juicer (refer to Disassemble the Appliance on page 13) (figure 1).
4. Clean the following parts with soapy water. A mild detergent is recommended to clean the parts.
Rinse the parts well and dry thoroughly.

food pusher

juicer cover

spout cover

pulp container

jug container
5. Rinse the stainless steel grater and filter assembly/cutting blades with clean water. Use the
cleaning brush gently brush from the inside of the basket to the outer rim to clean away pulp from
the filter and cutting blades. After cleaning the filter, hold it up towards a light to ensure the fine
mesh holes are not blocked. If the holes of the filter are blocked with pulp, soak the filter assembly
into hot water with lemon juice for 10 minutes to loosen the blocked holes and clean with the
cleaning brush again. Allow to dry on a cloth or paper towel before reassembling the juicer (figure
2 and 3).
6. Wipe the motor base and safety locking arms with a soft dry cloth.
7. To assist with cleaning, soak the stainless steel filter in hot soapy water for approximately 10
minutes immediately after juicing is completed.
8. Do not soak the stainless steel filter in bleach.
9. Always treat the filter with care as it can be easily damaged.
(Figure 1) (Figure 2) (Figure 3)