UNSUITABLE UTENSIL
Pottery Pot
Anti-heating
Glass Pan/Pot
Pot with
Curve Bottom
Pot with Legs
Outer Bottom
Less than 12cm
Copper Alloy Pot
with
Low Iron Content
TROUBLE SHOOTING
This device will detect and display on screen if functional disorder . It is solely
protected by it’s return circuit sensor.
While operating the appliance
suddenly stops from functioning.
Please check whether the ambient temperature is too high.
Please check whether the appliance has reached the preset
temperature setting.
Power off the appliance and unplug from the wall outlet.
Connect the plug to the wall outlet again and power on.
If the display screen show either “E0”, “E4”, “E5”, “E6”,
“E7”or “E9”, please send the appliance to the nearest
service centre or a similar qualified person for checking.
TROUBLE SHOOTING GUIDE
TROUBLE
CHECKING POINT
After you have connected
the plug to the wall outlet
and switched on the power
button, no beep sound and
indicators do not light up.
With continue 10 beep
sound and then the appliance
stops from operating.
Please check if the plug is well connected to the wall outlet.
Please check whether the power switch or fuse in your home
is cut-off.
Please check whether the power is cut off.
Please check whether the pot is centerly placed on the
cooking plate.
Please check whether the bottom diameter of the pot is
less than 12cm.
ENVIRONMENT- FRIENDLY DISPOSAL
You can help to protect the environment! Please
remember to respect the local regulations:
hand in the non-working electrical equipments to
an appropriate waste disposal centre.
7
8
SCREEN DISPLAY
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
FAULT DEFECTED
Main PCB at fault
Utensil not placed
Supply voltage too low
Supply voltage too high
Heat sensor open circuit or short circuit
IC error or PCB error
Over current protection
IGBT open circuit or short circuit
Top plate overheated
IGBT overheated
This appliance has an automatic utensil checking feature with unsuitable
utensil. You cannot select on the heating power even when the "ON/OFF"
button is pressed. Display screen will show "E1" error.
MAINTENENCE AND CARE
1. Please unplug the plug from the power socket after use.
2. Wait until the appliance completely cools down and wipe the appliance
body, cooking plate and control panel with soft and wet cloth. Neutral
cleanser may used for firm oil stain, and then wipe the remained residue
with soft and wet cloth.
3. Never rinse the appliance directly with water or immerse it in water.