Elba EH-G9325ST, Руководство пользователя, Страница: 7 / 10


Remove the decorative cover and loosen the screws on the base.

Loosen the screws on the charcoal filter and then take it out.

Loosen the screws on the air inlet ring and then take out the filter.

Turn the locking nut in clockwise direction to take out the impeller for cleaning.
REPLACING THE LIGHT BULB

Disconnect the power supply, slightly insert the screwdriver at the edge of the
LED light and pry downward to take out the LED light (4W).

Disconnect the connecting cable of LED light (4W) and replace a new LED light
unit (4W). Connect the power supply to ensure LED light (4W) is functioning.
※
The LED light bulb shall not be greater than 4W.
6