11
Fig. 7
Fig. 8
A
B
TRIPLE RING BURNER
The triple ring burner must be correctly
positioned (see fig. 7); the burner rib
must be enter in their logement as
shown by the arrow.
The burner correctly positioned must
not rotate (fig. 8).
Then position the cap A and the ring
B (fig. 8).
CLEANING THE TRIPLE RING
BURNER
Pay special attention to this burner: the
four holes around the outside of the
crown must always be kept clean.
When cleaning, remove the flame
divider (fig. 9) and use a cotton bud,
toothbrush, or some other item to clean
out any incrustations or dirt from the four
holes marked “H” (fig. 10).
This procedure is necessary to ensure
the burner functions correctly.
Fig. 9
H
Fig. 10