OPERATION PROCEDURE AND MODULATON
1. HOW TO STRIKE FIRE
Set the knob to the gas off position and then turn on the
gas source switch. Follow the picture on the right side,
push the knob in 3mm and turn anti-clockwise. You will
hear a click sound at the same time the fire will be lighted,
then you can let go of the knob.
2. POWER MODULATION
You can control the flame by turning the knob to the max or
min position to increase or decrease the intensity of flame.
The pointer of the knob which faces to the wide area is high
intensity; reversely face to the narrow area is low intensity.
3. POWER OFF
To turn off turn the knob clockwise to the off position, the stove will be off automatically.
WARNING: Please turn off the gas source when not in used.
4. AIR INTAKE MODULATION
If the flame becomes unstable, turn the wind switch under
the gas stove to reduce the air intake. If the flame is
burning out of place, use the wind switch under the stove
to regulate it.
CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel, wooden
or abrasive cleaners to clean the appliance.
WARNING
: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT THE
GAS SOURCE IS TURNED OFF BEFORE CLEANING THE APPLIANCE.
Содержание EGC-A5261SS
Страница 5: ......
