Elba ECH-A9004ST, Руководство пользователя

Страница: 5 / 10

Position of the Hob
The diagram illustrates the cutting size and additional shaping required for the built-in
cave installation. It is always crucial for you to measure the actual ceramic hob
dimension before making any cuts.
Electrical Connection
It is obligatory for the electrical system to be grounded according to the method required
by safety rules.
Before the appliance is connected to the mains, please do assemble one polar breaker
with over 3mm opened on the mains. The rated current of the breaker is strongly
recommended over 40A.
Never unplug by pulling on the cable.
Immediately after installation carry out a brief inspection test of the hob by following the
instructions. If the hob fails to operate, after checking that you have carried out the
instructions correctly, disconnect the appliance from the electrical mains and contact the
service centre.
Never attempt to repair or modify the appliance.
Do not use adapter or shunts as these could possibly cause overheating and risk of fire.
The appliance must not be built-in above a dishwasher.
Installation of an oven without cooling fan underneath the hob is forbidden.