10
*
When the signal from the remote controller
becomes weak and the indoor unit can not
receive it properly;or the indications on the
display screen becomes blurred,please slide
the back cover and replace with two new
AAA batteries.
*
The positive and negative poles must
match the installation positions.
*
New batteries of the same type have to
be used for replacement.
*
If the remote controller is not to be used
for long time,take out the batteries so as to
prevent the leakage of the electrolyte from
damaging the controller.
*
If when the remote controller is at abnormal
state,you can take out the batteries on the
back cover to clear off the display.
NOTE:
*
Use the sleep mode when you are going to bed.If this mode is used in the day,the capacity is reduced since the
ambient temperature is too high.(COOL MODE).
*
During the operation of cooling,the room temperature will be raised gradually by 2
0
C
(
4
0
F
)
higher than the setting
after the air conditioner begins to operate in the sleeping mode.
REPLACEMENT OF BATTERIES
Remote Controller
slide
the ba
ck co
ver
