Elba Domino E35-100 XD, Инструкции по использованию - Советы по установке

Страница: 23 / 64

23 23
ELECTRICAL SECTION
3
The appliance must be connected to the electrical
network verifying that the voltage corresponds to the
value indicated on the specifications plate.
We recommend that the appliance is connected by a
suitably qualified person who will comply with the current
IEE and local regulations.
It is recommended that the appliance is connected to a
SWITCHED FUSED SPUR OUTLET, with a minimum
opening between the contacts of 3 mm, similar to that
shown in fig. 3.1.
The switched fused spur outlet should be easily accessible
and no more than 2 metres away from the appliance.
Alternative connection methods may be available as long
as they conform to current IEE wiring regulations.
The power supply cable must not touch the hot parts and
must be positioned so that it does not exceed 75°C at any
point.
Once the appliance has been installed, the switch must always be accessible.
IMPORTANT: The appliance must be installed in accordance with the
manufacturer’s instructions. Incorrect installation, for which the manufacturer
accepts no responsibility, may cause damage to persons, animals and property.
The connection of the appliance to earth is mandatory. The manufacturer declines
all responsibility for any inconvenience resulting from the inobservance of this
condition.
Before carrying out any work on the electrical parts of the appliance, the appliance
must be disconnected and locked off from the mains.
FUSE
SWITCHED FUSED
SPUR OUTLET
Use a 3 amp fuse
ON
Fig. 3.1
UNITED KINGDOM ONLY