Elba AS 619-100, Инструкция по использованию

Страница: 24 / 40

24
Setting
1.
Set the cooking function by turning the oven
selector to the function required.
2.
The cooking temperature appears on the display.
To change it proceed as described in the Setting
the cooking chapter
3.
Press pushbutton 2.
AUTO
starts to flash and
0.00
appears.
4.
Press pushbuttons 5 or 6 to set the cooking time
(cooking time in hours and minutes: set it to ten
minutes less than the time required because the
stored heat will complete the cooking).
5.
On the display
AUTO
becomes steady and the
cooking programme starts.
During cooking
6.
During the cooking cycle, the display shows the
oven temperature measured by the probe or pre-
set temperature.
Press key 2 to display the time remaining until the
end of cooking.
The cooking time and temperature can be varied
at any time, as described above.
At the end of cooking
7.
End
appears on the display,
AUTO
flashes and
the audible signal sounds.
The cooking cycle has finished and the oven is
OFF.
8.
Press any programmer pushbutton to stop the
audible signal.
9.
OFF
appears (oven OFF).
10.
Turn the function selector to
0
(oven OFF).
11.
The programmer display shows the time.
Note: At the end of the programme always turn the
function selector knob to 0 (oven OFF).
SEMI-AUTOMATIC COOKING
Start immediate cooking or switch the oven off automatically after the pro-
grammed cooking time.
2
5 6