BEFORE YOU CALL FOR SERVICE
Before calling for service, be sure you read the following to avoid
an unnecessary service call.
TROUBLE
CAUSE
REMEDY
After the ignition knob is
released, the flames are
extinguished.
Although there are ignitions,
the burners do no light on.
Uneven flame
The flames become yellowish.
The flames are extinguished
while the unit is in use.
Abnormal sounds during
combustion.
Smell of gas.
The ignition knob is not turned
on properly.
Air is entrapped in the rubber
gas hose.
The ignition spark device is
dirty or wet.
The rubber hose is bent.
Short of gas supply
The air adjaster is not in a
fixed position.
The slits in the burner caps
are clogged.
The burner caps are not
mounted properly.
Gas leakage from cracks of
rubber hose.
Loose connection of rubber hose.
Turn it counter clockwise.
Open the main valve.
Repeat turning it on
several times.
Replace gas cylinder.
Set it to desired position
properly. See figure#18
Clean the cap.
Mount them in place.
Replace it.
Secure the rubber hose
with the hose clamp.
※
Consult your dealer if you may not solve problem.Be sure to turn off the main cock.
WHEN SERVICE IS REQUIRED
Turn off the gas supply main cock and consult with your dealer for service or
call your nearest authorized service agency.
When calling service,give the following information:
1.Your name,address and phone number.
2.Model name and serial number,and date of purchase.
3.Problem in detail.
4.If you incur any problems,please take the stove to our service
department for repair.
INSTRUCTION MANUAL
CONTENTS
FEATURE DIAGRAM
INSTALLATION INSTRUCTIONS
HOW TO OPERATE
IMPORTANT SAFETY INSTRUCTIONS
ADJUSTMENT OF COMBUSTION
CARE OF YOUR GAS COOKER
BEFORE YOU CALL FOR SERVICE
1
1
2
3~4
5
6
7
GLASS STOVE
READ AND FOLLOW INSTRUCTION MANUAL BEFORE USE.
Ignition pin is far from the ring
cap
Install the battery wrongly
More the ignition pin and
keep 3-5mm from the ring cap
Install the battery correcily.
Clean or dry up.
Install if properly or replace it
7
