Elation VOLT Q5E, Руководство пользователя

Страница: 20 / 26

20
I N T E R N A L W I R E L E SS D M X R E C E I V E R ( E W D M X)
CLEARING EWDMX TRANSMITTER LINK
Access the fixture’s main menu and toggle to the “PERSNAL” menu, then access the “WDMX” sub
menu and select “ClrWDMX” to clear any existing link between the fixture and a EWDMX Transmitter.
The EWDMX indictor on the fixture will turn solid
RED when the link is severed.
You may also clear the link directly from the EWDMX Transmitter. First, be sure the fixture(s) is
powered ON, and then hold down the configuration button on the WDMX Transmitter for as least 5
seconds. This will automatically clear the link between the EWDMX Transmitter and any fixture that
is powered ON. All EWDMX indictors will glow solid RED if the procedure was successful.
EWDMX INDICATORS
RED / GREEN (Rapid Flashing) = Syncing to a EWDMX Transmitter
RED / GREEN (Slow Flashing) = Paired with a EWDMX Transmitter but not receiving a DMX signal
from a controller.
GREEN (Solid) = Paired with a EWDMX Transmitter and receiving DMX data
RED (Solid) = Not paired with a EWDMX Transmitter (FREE)
WIRELESS EWDMX INSTALLATION LOCATION GUIDELINES
Wireless DMX signal can penetrate walls, glass, metal, and most objects. However, there are many
factors that can affect and/or interrupt the wireless DMX signal, one of which is people. Therefore,
it is highly recommended to position the wireless transmission antenna a minimum of 9.8 ft. (3m)
above audiences and/or above ground level. Careful planning and testing of the selected installation
location is critical to ensure optimum and reliable wireless DMX operation.