background image

 
 
 

PLATINUM WASH ZFX PRO XL

™ 

©Elation Professional®                             20                     

PLATINUM WASH ZFX PRO XL

™ 

8. FIXTURE MENU 

 

On-Board System Menu: The PLATINUM  WASH  ZFX  PRO  XL™ comes with an easy to 

navigate system menu. This next section will detail the functions of each command in the 

system menu. 

 

LED Control Panel: The control panel located on the top, front of the fixture allows you to 

access the main menu and make all necessary adjustments to the PLATINUM WASH ZFX 

PRO XL™. During normal operation, tapping the “MODE/ESC” key once will access the 

fixture’s main menu. Once in the main menu you can navigate through the different functions 

and access the sub-menus with the Up  and Down buttons. Once you reach a field that 

requires adjusting, tap the ENTER button to activate that field and use the UP and Down 

button to adjust the field. Tapping the Enter button once more will confirm your setting. Once 

a setting is saved the display will briefly readout OK to confirm a new setting has been made 

and locked into memory. You may exit the main menu at any time without making any 

adjustments by tapping the MODE/ESC button. 

 

MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front of 

the unit. Press this button to activate the system menu. Tap the UP button until you reach the 

function you wish to change. When you reach the function you wish to change tap the ENTER 

button once to select that menu functionWhen a function is selected the menu will begin to 

flash, use the UP or DOWN button to change the function. Once your changes are made tap 

the ENTER button yet again to lock the change in the system menu. To exit without making any 

changes tap the MODE/ESC button. 

 

The fixture contains a rechargeable battery back-up system that stores all setting and also 

allows the menu to be accessed when the fixture is not connected to power. To access the 

menu via battery power, press and hold the DC button for two seconds, this will activate the 

menu. The display will automatically turn off approximately one minute after all menu 

commands are completed. 

 

 

 

 

 

Содержание Platinum Wash ZFX Pro XL





















































Отзывы: