w w w . e l a t i o n l i g h t i n g . c o m /
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 27
/ / / / / / / / / / / / / / / / / /
LEVEL Q7™ User Manual Version 2
EditProg - EditScen
Edit the scenes of the internal programs.
1
．
Access the main menu by pressing
MODE/ESC
.
2
．
Press the
UP/DOWN
buttons until
“EditProg”
is displayed and press
ENTER.
3
．
Press
UP/DOWN
buttons until
“EditScen”
is displayed and press
ENTER
.
4
．
Press
UP/DOWN
buttons to select desired Scene number
(Scen001-Scen250)
,
and press
ENTER
to confirm selection.
5
．
Press
UP/DOWN
buttons to select desired function
(Auto, Red, Gree, Blue,
Whit, Stro, Dimm, Macr, Temp, ScenTime, InByOut)
, and press
ENTER
to confirm
selection.
6
．
Press
UP/DOWN
buttons to select desired value
(001-250)
and press
ENTER
to
confirm selection.
7
．
Press
MODE/ESC
to return to previous menu or display will automatically exit.
EditProg - RecCntrl
This fixture features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the
desired scene numbers via the encoder (from – to). When you call up the scenes at
your controller, they will automatically be transmitted to the moving head.
EditProg - RecCntrl - Execution
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to
Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit. If set to “Slave
2”, the Slave unit receives “Auto Program Part 2”.
