Followspot
FSD 575
For your own safety, please
read this user manual carefully
before you start-up and use.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a
dangerous voltage you may suffer a dangerous electric shock when touching the wires! Make sure
that the available voltage is not higher than stated in this manual.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the device
switched off until it has reached room temperature.
This device falls under protection-class I, therefore it is essential that the blue conductor gets
connected to earth.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and
the power-cord from time to time.
If the external flexible cable or cord of this device is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such
an extent that their effectiveness is impaired, for example by cracks or deep scratches.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
DANGER OF BURNING!
Never touch the device during the operation! The housing heats up to the
housing temperature T
surface
.
Don’t switch the device on and off in short intervals as HMI Lamp can’t restart so quickly.
HEALTH HAZARD!
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away children and amateurs from the device!
There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
This device is a lighting effect for creating decorative effects. This fixture is only allowed to be operated
with an
A
lternation
C
urrent of max. 230V/50Hz 1000W and was designed for indoor use only.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety
of others!
The symbol
M
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 2 meters.
The maximum ambient temperature T
a
must never be exceeded.
Operate the device only after having become familiar with its functions. Most damages are the result of
unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this instruction, the product
may suffer damages. Furthermore, any other operation may lead to dangers like short-circuit, burns,
electric shock, lamp explosion, crash etc.
Focus
Color Changer
Iris
Bracket
Followspot
®
Junostraat 2, 6468EW Kerkrade
The Netherlands
www.americandj.eu
FSD 575
