©
Elation
®
- www.elationlighting.com - Event Panel System™ User Manual Page 11
©
Elation
®
- www.elationlighting.com - Event Panel System™ User Manual Page 12
Event Panel System™ DMX Values & Traits - 3 Channels
Event Panel System™ DMX Values & Traits - 4 Channels
Channel Value
Function
1 RED
1 - 255 0% - 100%
2 GREEN
1 - 255 0% - 100%
3 BLUE
1 - 255 0% - 100%
4 MASTER DIMMER
1 - 255 0% - 100%
Channel Value
Function
1 RED
1 - 255 0% - 100%
2 GREEN
1 - 255 0% - 100%
3 BLUE
1 - 255 0% - 100%
Event Panel System™ Battery Pack
The Event Panel comes with a portable battery pack so that you can
set up the fixture anywhere without the use of a wall outlet.
To charge the battery pack, you must first disconnect the LED
Panel from the battery.
Once disconnected, connect the battery
pack to a matching power outlet using the supplied 12v
DC power
supply. Turn the battery pack on to begin charging. Again, the LED
Panel must be disconneted from the battery pack when charging the
battey.
When the pack is charging the Red LED will glow, when the pack is
fully charged the Green LED will glow.
Connect the battery pack to the Event Panel via the 2-pin cable and
turn on the power to the battery pack.
It takes about 8 hours to fully charge the battery pack. If the bat-
tery pack is completely discharged, it will take 4-6 hours for the
first LED to glow.
Pay attention to the Battery Life Indicator on the battery pack to
keep track of the battery pack charge level.
Connecting the Event Panel to the Battery Pack:
Connect the Event Panel to the battery pack using the included trig-
ger pins. Line up the trigger pins with the holes and rotate the pins
unil you feel them slide easily into the holes. To lock the pins into
place apply pressure and rotate turn the pins clockwise to lock them
into place. Test the attachment by gently pulling on the Event Panel.
