©
Elation Lighting
®
- www.elationlighting.com - ELED B48 Instruction Manual Page 8
ELED B48 Operating Instructions
ELED B48 Operating Instructions
Operating Modes:
You can use the ELED B48 in either a stand alone mode or a master/
slave configuration, there are 4 modes to choose from:
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
• Auto Mode - The unit will automatically chase through the different
colors.
• Static Color Mode - Choose a single color to stay static.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation
®
Show Designer™. Choose between a 7 DMX chan-
nel mode or 12 DMX channel mode.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of
the unit. Use standard XLR cables to link your units together. Re-
member that the Male XLR connector is the input and the Female
XLR connector is the output. The first unit in the chain (master)
will use the female XLR connector only. The last unit in the chain
will use the male XLR connector only.
2. You will also have to link the power cords to each other, as you
did with the XLR cables.
3. Using the Master unit, choose your desired mode and connect
the “Slave” unit or units.
4. Set the “Slave” unit(s) to the first address mode. So all “Slave”
units display “1001”. They will now follow the “Master” unit.
Sound Active Mode:
In this mode the ELED B48 will react to sound, and chase through the
different colors. There are two sound active modes to choose from.
1. Plug the fixture in and press the left (MODE) button until “3-So” is
displayed
.
2. The fixture will now change color via sound.
3. You can also press the left (MODE) button until “5-00” is displayed
.
“5-00” is another sound active mode, but mode 5 must remain
“5-00”.
Do not press the middle (UP) button or right (DOWN)
button while in this Sound Active mode or you will enter Auto
Mode. Please see Auto Mode below.
4. With mode 5 in sound active mode, press the left (MODE) button
once so that “6-01” is displayed. You may now select your desired
program in mode 6 by pressing either the middle (UP) or right
(DOWN) buttons. The program you select will now run in Sound
Active mode. There are 40 programs to choose from.
Auto Mode:
There are two auto modes to choose from.
1. Plug the fixture in and press the left (MODE) button until“6-01” is
displayed. When “5-00” is displayed this is actually a Sound Active
mode, you must adjust mode 5 so that is not in sound active.
Anything between “5-01” and “5-15” is now Auto Mode.
2. Select your desired program in mode 6 by pressing either the
middle (UP) or right (DOWN) buttons. There are 40 programs to
choose from.
3. Adjust the speed of mode 6 by using mode 5. Adjust the speed by
pressing either the middle (UP) or right (DOWN) buttons. The speed
can be adjusted from “5-01” the slowest, to “5-15” the fastest.
Static Color Mode:
Choose one of 36 colors to remain static.
1. Plug the fixture in and press the left (MODE) button until “4-00” is
displayed
.
2. Now by pressing either the middle (UP) button or right (DOWN) but-
ton you can scroll through and choose which color you want to
project.
Remember the color you choose will remain static.
DMX Mode:
There are two DMX Modes to choose from. One mode is a 7 Channel
Mode, and the other is a 12 Channel Mode. Operating through a DMX
controller give the user the freedom to create their own programs tai-
lored to their own individual needs. This function also allows you to
use your fixtures as spot lights.
©
Elation Lighting
®
- www.elationlighting.com - ELED B48 Instruction Manual Page 7
