Elation ELAR QUAD BAR, Руководство пользователя

Страница: 30 / 42

w w w . e l a t i o n l i g h t i n g . c o m
30
ELAR QUAD BAR
™
User Manual 2.0
EDIT PROGRAM – Edit Scenes
Edit the scenes of the internal programs.
1. Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until
“Edit Program” is highlighted and tap ENTER .
2. Tap UP/DOWN until “Edit Scenes” is displayed and tap ENTER .
3. Tap UP/DOWN to select desired scene number (“Scene 001” - “Scene 125”)
and tap ENTER to confirm selection.
4. Tap UP/DOWN to select desired function (“Strobe”, “Dimmer”, “Chase Effect”,
“Chase Speed”, “Red(1-16)”, “Green(1-16)”, “Blue(1-16)”, “White(1-16)”,
“Color Temp”, “Color Mode”, “Fade Time”, “Secne Time”, “Input By Out”)
and tap ENTER to confirm selection.
5. Tap UP/DOWN to select desired position (“0-255”) and tap ENTER to confirm
selection. For “Secne Time” , tap UP/DOWN to select the desired time (“00.2s”
– “99.9s”) and tap ENTER to confirm selection.
6. Tap MODE/ESC to return to the main menu.
EDIT PROGRAM – Record Controller
The moving head features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the
desired scene numbers via the encoder (from – to). When you call up the scenes at
your controller, they will automatically be transmitted to the moving head.
EDIT PROGRAM – Record Controller – Working With Built In Program
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set
to Slave” , the Master unit sends “Auto Program Part 1” to the Slave unit.
If set to “Slave 2” , the Slave unit receives “Auto Program Part 2” .