Elation ELAR EXTQW BAR HP, Руководство пользователя

Страница: 10 / 18

w w w . e l a t i o n l i g h t i n g . c o m
10
ELAR EXTQW BAR HP
™
User Manual 1.0
Select light program mode
Press R/G/B/W to choose R/G/B/W colors and pressing “+” and “-” or put in three number
000-255 to adjust the intensity of the light. You can also press FLASH to turn on flash and press
“+”and “-” or put in two numbers 00-15 to adjust the flash speed, 00 is flash off, 01 is the slowest
speed, 15 is the fastest speed.
DMX MODE
There are 3 DMX modes; 7 Channel Mode, 11 Chanel Mode, and 51 Channel Mode. You must
set the DMX Channel mode before you address the fixture. To select your desired DMX Channel
mode press the DMX mode button, and then press the “+” or “-” buttons to scroll through the
DMX Channel modes. Once you find your desired DMX Channel mode, set your desired DMX
address:
• If the RED LED’s glow you are in DMX Mode 1: 7 DMX Channels
• If the GREEN LED’s glow you are in DMX Mode 2: 11 DMX Channels
• If the BLUE LED’s glow you are in DMX Mode 3: 51 DMX Channels
Set ADDR
Press this button to set the DMX address or initialize the program, then the red, green, blue and
white lights will flash 2~3 times. Please put in 3 number, for example, 1 2 3. After the red light is on,
please put in the first number. After the first number is accessed the green light will be on, then
put in the second number. When the blue light will be on, please put in the third number. After all
the three number are put in, the red, green, blue and white lights will flash 2~3 times, which
indicate that the DMX address is right and it go in to the DMX MODE automatically. If the address
is wrong the red light will be on. New DMX address should be put in.
If the 951 are put in, red and green lights will be on. Press “0” to initialize the program. If the
wrong address is put in, the red light will be on, indicating new address should be put in. Then the
system will run in the first color-jumping mode.
Black Out mode
Press “BLACK OUT” to set the LED lights power on or power off by pressing this button.
Now you may connect the fixture via XLR connections to the Outdoor LED rectangle light 4in1,
please read the corresponding fixture in this manual to find out about the DMX modes, values
and straits.