Elation ELAR 108PAR RGBW, Руководство пользователя

Страница: 21 / 48

ELAR 108PAR RGBW
™
©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com
9. DISPLAY MENU
Default settings shaded.
Remarks:
1) If the fixture does not receive a DMX signal the menu display will flash
repeatedly.
2) TIME: Adjust the hold time for each scene in built-in chase programs.
3) FADE: Adjust the fade time between each scene in the built-in programs.
9.1 “MODE” - Function Mode:
9.1.1 <ADDR> - DMX address setting – This function is used to set or adjust the
fixture’s starting DMX address. Every device controlled by DMX has to have a unique
starting address. The addressing feature is what allows DMX to function properly. The
DMX address of a fixture is what allows it to communicate with a controller properly. The
DMX addressing also allows the fixture to ignore any DMX information coming from the
controller that is not meant specifically for the fixture. Because each fixture is connected
VALU A001 ~AXXX (AXXX) DMX address setting
SLAV ON/ OFF Set as Slave
<ADDR>
RDMX ON /OFF Change address via DMX
<RUN> AUTO ALON /MAST Run Auto program
VALU D-XX D-00(DXXX) Display DMX value
FLIP ON/ OFF Flip display
MODE
<DISP>
D ON ON /OFF Delay shutting off LED display
<CHAN>
4CH /5CH/7CH/9CH DMX channel Mode
<FAIL> OFF/ HOLD /AUTO Status while there is no DMX
<DFSE> ON/ OFF Default setting
SET
<VER> V-1.0~V-9.9 Software version
MANL
<CH01>
~<CH09> 01 XX (00~FFH)
09 XX (00~FFH)
Manual adjust intensity
<LIFE> 0000~9999(hours) Life time of machine running
<CODE> CXXX Password of clear time ”038”
TIME
<CLFE> ON/ OFF Clear machine running time
<STEP>
S-01~ S-48 Select steps of program
C-01~C-09
01 XX (00~FFH)
09 XX (00~FFH)
FADE XXX
EDIT <SC01>
~<SC48>
TIME XXX.X (000.1s~999.9s)
Edit the internal scenes