Elation E Spot Led Скачать руководство пользователя страница 5

 
 

E SPOT LED™  

©Elation Professional, Los Angeles Ca. 

 

www.ElationLighting.com

   

 

rain or moisture.   

 

Caution!

 

There are no user serviceable parts inside this unit. Do not attempt any repairs 

yourself, doing so will void your manufactures warranty.   

 

Please do not discard the shipping carton in the trash. Please save for return shipping in the 

event service is ever needed or recycle the container whenever possible. 

 

WARRANTY REGISTRATION

The E Spot LED

 carries a two year (730 days) limited 

warranty. Please fill out the enclosed warranty card to validate your purchase. All returned 

service items whether under warranty or not, must be freight pre-paid and accompany a 

return authorization (R.A.) number. The R.A. number must be clearly written on the outside 

of the return package. A brief description of the problem as well as the R.A. number must 

also be written down on a piece of paper and included in the shipping container. If the unit is 

under warranty,  you must provide a copy of your proof of purchase invoice. Items returned 

without a R.A. number clearly marked on the outside of the package will be refused and 

returned at customer’

s expense. You may obtain a R.A. number by contacting customer 

support at (323) 582-3322. 

 

Epileptic Warning:

 Those suffering from epilepsy should avoid looking directly into the light 

source at all times. 

 

Never open this fixture while in use!

 

This device falls under protection-class 1. Therefore it is essential that the device be 

grounded properly. 

 

All electrical connections must be performed by qualified personal. 

 

Be sure the available voltage matches the voltage requirements of the unit. 

 

Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace 

it immediately with a new one of similar power rating. 

 

Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of 

the cord.

Содержание E Spot Led

























































Отзывы: