Elation E SPOT III, Руководство пользователя

Страница: 18 / 30

w w w . e l a t i o n l i g h t i n g . c o m
18
E SPOT III™ User Manual
EDIT PROGRAM – Record Controller
The fixture features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the
desired scene numbers via the encoder (from – to). When you call up the scenes at
your controller, they will automatically be transmitted to the moving head.
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to
“Slave 1” in the menu “Set to
Slave” , the Master unit sends “Auto Program Part 1” to the Slave unit.
If set to “Slave 2” , the Slave unit receives “Auto Program Part 2” .
To start an Auto Program proceed as follows:
1. Slave Setting
R-;B;9J “Function Mode” .
R+H;II
ENTER
to confirm.
R-;B;9J “Set to Slave” .
R+H;II ENTER to confirm.
R-elect “Slave 1” , “Slave 2” or “Slave 3” .
R+H;II ENTER to confirm.
R+H;II MODE/ESC in order to return to the main menu.
2. Automatic Program Run
R-;B;9J “Function Mode” .
R+H;II ENTER to confirm.
R-;B;9J “Auto Program” .
R+H;II
ENTER
to confirm.
R-elect “Master” or “Alone” .
R+H;II ENTER to confirm.
R+H;II MODE/ESC in order to return to the main menu.