Power Input
Channel Output
Fuse(Internal)
DMX Input
DMX Output
Dimensions
Weight
............................................................................................................AC 120V~60Hz, 15A max.
..............................................................................................Total 15A max.,
................................................................................................... F6.3A 250V 5x20mm(x4PCS)
................................................................................................................3-pin male XLR connector
.........................................................................................................3-pin female XLR connector
............................................................................................................................ 180x177x64mm
................................................................................................................................................... 1.2 Kg
5A per channel
Technical Specifications:
Notice Information
Specifications and improvements in the design of this product and this manual are
subject to change without any prior notice.
Page 4
Troubleshooting:
No Power to the pack:
No Channel Output:
No DMX Control:
Disconnect the power line cord. Reconnect the line cord to ensure proper connection. If the problem still
persists, check the building service panel and make sure the service circuit breakers are ON.
Disconnect the power line cord. Check the corresponding channel fuse or fuses by removing the four
phillips head screws on the rear panel to expose the circuit board and fuses. Each channel fuse is
marked on the PCB- TH1 = Channel 1, TH2 = Channel 2, TH3 = Channel 3 and Th4 = Channel 4. Check
the relevant channel fuse or fuses and replace if required. Always replace with same type and value. The
DP-415 incorporates four 6.3A 250V normal blow fuses. Replace rear panel and phillips head screws.
Check your dip switch settings. Ensure that the correct dip switches are set to the ON position. Check
the DMX channel patch on your DMX console if available.
If you’ve tried the above and the unit continues to malfunction, please contact ELATION® customer support
at (800) 322-6337, your unit may require service. Once you describe your problem to the customer service
representative, he or she will determine whether it should be sent in or not. If it does need to be sent in, you
will be issued a return authorization number that must accompany the package when sent in. Please write
this RA# on the outside of the box with a black marker and also write it on any packing slip that may be
included with the package.
