2. Operation Guide
2.2 Chase Mode
If you set 4 channel output for this dimmer, this unit can be used as a 4 channel
chaser. This function allows you to select any of these 16 built-in programs or set
the pack to chase as desired to get a more dramatic light show. You may control
the speed at which the programs will chase.
2.2.1 Chase Enable
2.2.2 Chase Program
DMX
DMX
MIDI
MIDI
Receive
Receive
Chase
Chase
Tap MODE until the Chase LED in the Segment
Display lights, indicating Chase mode is active.
Stand by
Stand by
MODE
MODE
MENU
MENU
1. Enter Chase mode, the Segment Display shows
the chase program.
When the Segment Display shows "Pr" followed
by two numbers or "AU", any program selected
will chase instantly.
When the Segment Display shows "PF" followed
by two numbers or "AU", any program selected
will fade or glide between chase steps instead of
instantly changing. The rate of the change is adjusted
by the time between steps(chase speed).
[AU]: each of the 16 programs will be executed eight
times in sequence.
9
