Elation ARTISTE PICASSO, Руководство пользователя

Страница: 25 / 42

25
www.elationlighting.com
E - F L Y W I R E L E S S D M X S E T U P
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY
FIXTURE, MAKE SURE THE SOURCE E-FLY WIRELESS DMX
TRANSCEIVER DEVICE IS OFF.
TO CONTROL FIXTURE WITH E-FLY WIRELESS DMX SIGNAL
1. Ensure the source E-FLY wireless DMX Transceiver device is powered OFF.
2. Power ON fixture and from the LCD control panel select DMX & E-FLY or E-FLY & OUT in the
Select Signal sub menu of the PERSONALITY main system menu.
3. From the LCD control panel set the E-FLY wireless channel to the same wireless channel of
the source E-FLY DMX Transceiver device in the Set E-FLY Chn sub menu of the PERSONALITY
main system menu.
NOTE: Erratic fixture movement may occur if other E-FLY wireless DMX products are in
use in the same area and are using the same E-FLY wireless channel. The fixture may
immediately start to respond to the DMX wireless signal from another E-FLY wireless
DMX Transceiver immediately when E-FLY is enabled. Make sure to know what E-FLY
wireless channels are being used in the area where the fixture is being installed.
ELATION E-FLY WIRELESS TRANSCEIVER has 0-14 wireless channels.
4. Set fixture DMX address in the Set Dmx Address sub menu of the FUNCTION main
system menu.
5. The E-FLY signal Indicator on the fixture LCD control display will illuminate GREEN if a
successful wireless DMX connection has been made or illuminate RED for NO connection.
If no connection is made, repeat steps 1-4 above.
6. Repeat this process for all E-FLY compatible fixtures in the E-FLY wireless network,
making sure all fixtures are assigned the same E-FLY wireless channel.
7. After all fixtures in the E-FLY wireless network have been set to the same E-FLY wireless
channel and powered ON, now power ON the source E-FLY DMX Transceiver device.
8. Test all fixtures connected to the E-FLY wireless network to confirm proper functionality.