Elation 1237000253, Руководство пользователя

Страница: 57 / 64

57
R E M OT E D E V I C E M A N AG E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used
throughout the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data
standard for lighting, allowing the DMX systems of the device to be managed, modified,
and monitored remotely (hence, remote device management). This protocol is ideal for
fixtures installed in locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM
enabled controller to send out a signal to devices on the wire, as well as allowing
the fixture to respond (known as a GET command). The controller can then use it’s
SET command to modify settings that would typically have to be changed or viewed
directly via the unit’s display screen, including the DMX Address, DMX Channel Mode,
and Temperature Sensors.
Please be aware that not all RDM devices support all RDM features , and therefore it
is important to check beforehand to ensure that the equipment that you are considering
includes all of the features that you require.
The following parameters are accessible in RDM on this device:
LED FIXTURE
Sensor Definition YES
Sensor Value YES
Device Model Description YES
Manufacturer Label YES
Device Label YES
DMX Personality YES
DMX Personality Description YES
Device Hours YES
Comms Status NO
Status ID Description NO
Clear Status ID NO
Device Power Cycles NO
Tilt Invert YES
Display Invert YES
Display Level NO
Realtime Clock NO
Power State NO
Preset Playback NO
Default Slot Value NO
Language NO
Language Capabilities NO
Boot Software Version Label NO
Boot Software Version ID NO
Product Detail ID List NO
Status Messages NO