© 2021 ELATEC GmbH – TWN4 MultiTech 3 LEGIC M BLE integration manual DocRev1 – 10/2021
Page
3
of
9
1
INTRODUCTION
1.1
ABOUT THIS MANUAL
This integration manual explains how to integrate ELATEC RFID reader module TWN4 MultiTech 3 LEGIC M BLE into a host device
and is mainly intended for integrators and host manufacturers.
The content of this integration manual is subject to changes without prior notice and printed versions might be obsolete. Integrators
and host manufacturers are required to use the latest version of this integration manual.
For the sake of better understanding and readability, this manual might contain exemplary pictures, drawings and other illustrations.
Depending on your product configuration, these pictures might differ from the actual design of your product.
1.2
ABOUT TWN4 MULTITECH 3 LEGIC M BLE
TWN4 MultiTech 3 LEGIC M BLE integrates RFID (125 kHz and 13.56 MHz), NFC and Bluetooth Low Energy capabilities into a
compact but powerful reader. Its reduced size combined with optimized read/write performance makes it the perfect reader for all
applications where small size and full performance matters, e.g. print solutions, healthcare applications, driver identification, POS
integration and much more. Furthermore, TWN4 MultiTech 3 LEGIC M BLE provides access to most common host interfaces such as
USB, serial (TTL) or I²C which are readily accessible through an on-board connector.
1.3
ELATEC SUPPORT
In case of any technical questions, refer to the ELATEC website (www.elatec.com) or contact ELATEC technical support at:
1.4
REVISION HISTORY
VERSION
CHANGE DESCRIPTION
EDITION
01
First edition
10/2021
2
SAFETY INFORMATION
•
ELATEC TWN4 MultiTech 3 LEGIC M BLE is an electronic component and should be installed exclusively by a trained and qualified
personnel.
•
ELATEC recommends the integrators to follow general ESD protective measures during the installation of
TWN4 MultiTech 3 LEGIC M BLE into a host device, e.g. the use of an antistatic wristband or special gloves.
•
The integrator should not touch the antennas (if not shielded), printed circuit boards, connectors or other sensitive components on
TWN4 MultiTech 3 LEGIC M BLE.
•
Before installing TWN4 MultiTech 3 LEGIC M BLE into a host device, the integrator should also make sure that he/she has read
and understood the ELATEC technical documentation related to TWN4 MultiTech 3 LEGIC M BLE, as well as the technical
documentation related to the host device. In particular, the instructions and safety information given in the user manual of
TWN4 MultiTech 3 LEGIC M BLE should be read carefully and listed in the technical documentation of the host manufacturer as
well, as soon as these instructions and safety information are required for a safe and proper use of the host device containing
TWN4 MultiTech 3 LEGIC M BLE.
