© 2021 ELATEC GmbH – TWN4 MultiTech 3 LEGIC M LF HF integration manual DocRev1 – 10/2021
Page
5
of
9
3.8
LABEL AND COMPLIANCE INFORMATION
Refer to Chapters “Compliance Statements” and “Integrator and Host Requirements” for detailed label and compliance information.
3.9
TEST MODES AND ADDITIONAL TESTING REQUIREMENTS
No specific testing method has been defined by ELATEC for TWN4 MultiTech 3 LEGIC M LF HF.
TWN4 MultiTech 3 LEGIC M LF HF has been tested and found in compliance with the specifications noted on the approval certificates
and other relevant approval documents. However, the integrator is still responsible for any additional testing and authorization process
required for the end product.
Refer to the KDB Publication
996369 D04 Module Integration Guide
of the FCC Office of Engineering and Technology (OET) for
detailed information about test modes and additional testing requirements for the host device.
3.10
ADDITIONAL TESTING, PART 15 SUBPART B DISCLAIMER
TWN4 MultiTech 3 LEGIC M LF HF is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant,
and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the
modular transmitter grant of certification. In addition, the final host product still requires Part 15 Subpart B compliance testing with
TWN4 MultiTech 3 LEGIC M LF HF installed.
3.11
MECHANICAL INSTALLATION
The reader module can be fixed into the host device with 3 screws M3.
3.12
ELECTRICAL CONNECTION
3.13
PROGRAMMATION/SOFTWARE INTEGRATION
n/a
