Elatec TWN3 MINI, Руководство пользователя

Страница: 3 / 9

© 2021 ELATEC GmbH – TWN3 Mini Reader MIFARE NFC user manual DocRev1 – 10/2021 Page 3 of 9
1 INTRODUCTION
1.1 ABOUT THIS MANUAL
This user manual is intended for the user and enables a safe and appropriate handling of the product. It gives a general overview, as
well as important technical data and safety information about the product. Before using the product, the user should read and
understand the content of this user manual.
For the sake of better understanding and readability, this user manual might contain exemplary pictures, drawings and other
illustrations. Depending on your product configuration, these pictures might differ from the actual design of your product.
1.2 ELATEC SUPPORT
In case of any technical questions, refer to the ELATEC website (www.elatec.com) or contact ELATEC technical support at:
support-rfid@elatec.com
In case of questions regarding your product order or if you wish additional copies of this user manual, contact your Sales representative
or ELATEC customer service at:
info-rfid@elatec.com
1.3 REVISION HISTORY
VERSION CHANGE DESCRIPTION EDITION
01
First edition
(replaces Transponder Reader Mini Reader MIFARE NFC Quick Start Guide , DocRev1,
dated 08/2020)
10/2021
2 INTENDED USE
ELATEC TWN3 Mini Reader MIFARE NFC is designed for integration into machines, handheld computers or any other device. The
focus has especially been set on size, low power consumption, price and flexibility. Thanks to its compact dimensions, integration
directly on a PC board is possible.
The product is intended to be integrated into a host device.
Any use other than the intended use described in this section, as well as any failure to observe the safety information listed in this
document, will be considered misuse and will void the warranty. ELATEC is not responsible for any damage or injuries resulting from
any misuse of the product.