Elatec MultiTech M TWN4 Скачать руководство пользователя страница 9

Elatec GmbH 

Page 9 of 13 

 
 

NOTE

: The Commission does not have a required SDoC format. This is an 

example only and is provided to illustrate the type of information that may 
be supplied with the product at the time of marketing or importation for 
meeting the FCC SDoC requirement. 
 

For class B devices: 
 

FCC §15.105 (b):   
Note: This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures: 
 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that 

to which the Receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

Содержание MultiTech M TWN4














Отзывы: