6
Using Your Water Kettle
Using Your Water Kettle
NOTE:
1) The kettle will reheat the water to the preset temperature and
then stop heating if the water temperature is 5°C lower than the
preset temperature during keeping warm
process. For example, if the preset temperature is 70
°
C, the kettle
will reheat the water to 70
°
C and then stop heating if the water
temperature is lower than 65
°
C during keeping warm process.
2) You can press “
” button or “
” button to make the kettle
stop keeping warm during keeping warm process.
3) Under keeping warm condition, remove the kettle from the
power base for more than 3 minutes, then replace the kettle on the
power base, the appliance will continue keeping warm based on
the preset temperature. Hold and press “ ” button for 2 seconds,
the appliance will enter into sleep mode, and you can press any
button to make the appliance enter into standby mode.
7. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle
as boiling water may result in scald, besides, don’t open the lid
while the water in the kettle is hot.
8. The kettle may be stored on the power base when not in use.
NOTE: Always disconnect the power supply when not use.
If the kettle operate without water accidentally, when
temperature sensor detects temperature exceed 105°, the kettle
will stop heating, meanwhile all of LEDs will blink for warning, if
this occurs, allow the kettle to cool before filling with cold water
to re-boil.
