8
Clean all the removable parts before using the appliance for the first time. Ensure that you do not injure
yourself on the sharp blade Switch the on/off button.
Remove the required length of cable from the appliance cable storage.
Place the pulp container )4( on the motor unit )7(
Place the micro filter )3( on the coupling )9( ; you can hear the micro filter )3( lock into place
Each time before using the appliance, check if the micro filter )3( is damaged. If you notice any cracks or
other damage you must not use the appliance until the micro filter )3( has been replaced.
Place the lid )2( on the appliance.
Then fasten both safety locks)6( on the lid )2( by pushing them upwards until you hear them lock into place.
Place the beaker )12( below the juice spout )5(.
Note: The appliance only functions when all parts are completely and correctly assembled and when the
safety lock )6( on the lid )2( has locked correctly into place.
Wash the required fruit/vegetables and chop them into the small pieces so that they fit in the lid )2(
without getting stuck.
Fold the juice spout )5( downwards so that the drip stop is not active.
Connect the mains plug to a mains socket and switch th on/off button.
Insert the chopped pieces of fruit and vegetable into the lid )2(.
Press the pusher )1( downwards slowly and steadily in order to obtain as much juice as possible.
If you press too hard this can hamper the quality of the juice. It can also cause the micro filter )3( to stop
and can damage it.
Attention: You must always keep your hands, spoons or other objects)e.g hair items of clothing, brushing
and cloths( away from the lid )2( when the mains plug is in the mains socket.
Once you have juiced all the pieces of fruit and vegetable and no more juice is running into the beaker
)12(, switch
the appliance off and pull out the mains plug. Wait until the micro filter )3( stops rotating.
If the motor sticks, rotates slowly or stops during operation, switch the appliance off immediately and pull
out of the mains socket.
Remove the micro filter )3( and clean it immediately.
STARTING UP THE APPLIANCE
5
