5
Know Your Blender
Cleaning And Maintenance
NOTE 1 : Make sure the jar base is placed in position completely before
operating.
5. Do not run the appliance for more than 1 minutes per time, and only
wait until the unit is cooled to room temperature before performing next
operation cycle.
6. Turn the Speed Selector to “ 0 ” position once the mixture has been
blended to your desired consistency.
7. Turn the jar assembly anti-clockwise and remove it from the motor
unit, reverse the jar assembly, carefully take down the jar base by
turning anticlockwise, then pour and serve.
Fig2
Make sure to disconnect appliance from power supply before cleaning
For blender
The Clean function can clean the blender easily and rapidly in
complete safety.
1. Pour a little warm soapy water into the Jar and turn the Speed
Selector to “P” position without releasing it for a few seconds.
2. Dismantle all detachable parts. Dissemble the Jar from the motor unit
and rinse it under running water, then detach the jar base from the jar
assembly.Rinse the jar, jar base and blade asm under running water.
Small jar
Blade asm
Jar base
