ELARABY TORNADO EHV-M30FSU-S Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 48

ELARABY TORNADO EHV-M30FSU-S Скачать руководство пользователя страница 16

16 - ENGLISH

To perform these operations the qualified installer will follow the indications
given in the "Adaptation to the various types of gas" section.
For safety operation make sure that the supply pressure respects the values
given in the "Table of burner and injector

If the appliance is supplied with liquid cylinder gas, make sure that the cylin-
der pressure regulator conforms to the local regulations in force.

The appliance must be connected to the gas system by a rigid metal pipe
(copper or  steel) or  continuous wall stainless steel flexible  hose  in  such a
way that the appliance is not stressed in
any way.
The  appliance  gas  inlet  tube  has  an  end
nut to which is connected the elbow union
(supplied; 1/2 thread male gas). It can be
turned depending on installation needs.
The rigid or flexible metal supply pipe
(l  max  =  2mt)  is  connected  to  the  part
oppo- site the elbow union. Remember to
put the gaskets supplied at the two ends of
the elbow union.
When  these  parts  are  disassembled  and
reassembled,  always  replace  the  gaskets
with new ones.
Once  the  appliance is  installed,  check  that  the  gas  pipe  is  not  pinched  or
damaged by mobile parts.

Important

: When installation is complete, check that all the gaskets are

leaktight using a soap-based solution, never a flame.

Warning:

The customer should call the service line for

ELARABY

/TORNADO

or national gas company for gas hob installation or gas

conversion as it must be carried out by specialized qualified person,
otherwise the company won't be responsable for any accidents due to any
change or dismantling from unaccredited centers nor unauthorized person.

Pipe
Nut

Gasket

Elbow
union

Gasket

Nut

Rigid or flexible
metal supply pipe

«
...
14
15
16
17
18
...
»

Содержание TORNADO EHV-M30FSU-S

















































Отзывы:

Нет отзывов