PREPARING THE SCALE FOR USE
1. Place the PS3000N USA scale on a flat surface.
2. Place the weighing platform on top of the scale with the platform posts positioned to slide into the 4 receptors on
the top of the main case (hinges to the back). Press down gently to secure.
3. Plug adapter (included) into the Scale (port at back of unit) and then into standard electrical outlet.
4. Press ON/OFF/TARE to turn on Scale. The display will read "Wait/Espara...". The Scale will then go through an
electronic self-test for about 2 to 5 seconds. If the NPS3000 is not stable, the display will not change. If excess
TARE or other LOAD is being applied, the display will read "Overload" and beep. The beep sound will continue until
the LOAD is removed.
To display the serial number of your scale, press Registered (REG) key while display is "Wait/Espara...".
5. When the Scale has passed its self-test and is ready for weighing, the display will read "1st Class Letter/0lb0oz
$0.42". The NPS3000 is now ready for weighing and calculating USPS rates up to 10 lb.
OPERATING THE PS3000N USA POSTAL SCALE
The PS3000N USA is easy to use and straight-forward in operation. First, establish which basic postal service you wish
to use (e.g., 1
st
Class, Packages, Global Express Mail, etc.). The 3-digit zip code, zone, destination country or country
code can be set (e.g. local zones, or for international services, set the country code or destination country). Finally,
decide whether you wish to utilize any of the supplementary services (e.g., Registered, Insured, Return Receipt, etc.)
and simply press the appropriate keys in turn. The display will guide you through displaying the services selected and
the total postage cost.
*NOTE: For zip code entries, the scale needs to be programmed with zip/zone data first. Refer to ZIP/ZONE
DATA PROGRAMMING section of this manual on how to program your scale’s zip/zone data.
KEYBOARD FUNCTIONS
