A. START-UP INSTRUCTIONS
1. Place the scale on a flat surface.
2. Plug AC adapter (included) into the Postage UK scale (port at back of unit) and then into mains power
supply.
3. Press ON/OFF key to turn on the scale.
4. When the scale has concluded its self-test, the scale is ready for weighing and calculating postage
rates. The default service is UK 1
st
Class Letter Stam ped.
NOTE:
For larger items that obscure the display, raise the angled platform prior to turning on the
Scale. DO NOT FORCE OPEN PAST ITS DESIGNED ANGLE OF APPROX. 7O DEGREES.
5. To display the 8-digit serial number of the scale, press
Letter/Large Letter/Packet
key during the self-
test sequence. (The serial number will be required when ordering new software updates for the scale).
6. User calibration at 1kg is available. Please refer to the section below for further details .
B. KEYBOARD
C
. POSTAL SELECTIONS
1.
1
st
Class Mail
(Letter/Large Letter/Packet)
Press this key to select 1
st
Class Mail Service. By default, pressing this key will select Stamped 1
st
Class Letter.
Press “Letter/Large Letter/Packet” key to toggle between 1
st
Class Letter, 1
st
Class Large Letter and
1
st
Class Packet services.
Press the “Metered/Stamped” key to toggle between Stamped 1
st
Class and Metered 1
st
Class
services.
The current weight limits of 1
st
Class Mail are as follows:
1
st
Class Letters – 100 grams
1
st
Class Large Letters – 750 grams
1
st
Class Packets – Up to scales maximum capacity
If the item being weighed exceeds the maximum weight limit of the selected 1
st
Class Mail service
“N/A” will appear in the display.
2. 2
nd
Class Mail
(Letter/Large Letter/Packet)
Press this key to select 2
nd
Class Mail Service. By default, pressing this key will select Stamped 2
nd
Class Letter.
Press the “Letter/Large Letter/Packet” key to toggle between 2
nd
Class Letter, 2
nd
Class Large Letter
and 2
nd
Class Packet services.
