Reason: The buffer checksum is failure.
Solution: Please to load a file to buffer. To reload a CDS file.
(33) ”Warning W033: Jumper is not located on correct position.”
Reason: Jumper is not located on correct position.
Solution: Please check Jump connection.
(34) ”Warning W034: The socket is failure.”
Reason: The writer is not ready.
Solution: Please check Jump connection and Socket connection.
(35) ”Error W035: The DWRITER does not support the OTP %s.”
Reason: The DWRITER does not support the OTP %s.
Solution: Please update the DWRITER hardware and software.
(36) ”Error W036:The DWRITER is not READY!!!”
Reason: The writer is not ready.
Solution: Please check Jump connection and Socket connection.
(37) ”Error W037:Please close SOURCE or READ window.”
Reason: After connect other “OTP micro controller” must close SOURCE and READ
windows .
Solution: Please close SOURCE or READ window .
27
