Elan VIA! VALET100EM, Руководство по установке

Страница: 32 / 41

VIA!VALET100EM
E L A N H O M E S Y S T E M S
Page 28 © ELAN Home Systems 2008 • All rights reserved.
Operation
The VIA!Valet100EM is designed to be simple and intuitive to oper-
ate. Each source is custom programmed to work just the way the
homeowner desires. This unit is a true touch screen controller; no
hard buttons or stylus required! Use a finger (or fingernail) to lightly
press on the screen each time an action is required.
Timeout
VIA!TOOLS provides separate Timeouts for Source page, Off page,
Lights page, Video, and Cameras. Each of these values should be
set with the homeowner’s lifestyle in mind.
Video Mode/Camera Mode
When in Camera Mode, the VIA!Valet100EM utilizes hidden buttons
on the display that allow for NEXT, PREVIOUS, SCAN ON, SCAN OFF
functionality. A fifth button, EXIT FROM VIDEO MODE, is also pres-
ent. These buttons are Autobuilt in VIA!TOOLS and will allow the
homeowner to display a specific camera or all cameras, as desired.
See VIA!TOOLS Help file for more specifics.
Video Overlays
Overlays are special pages built in VIA!TOOLS to control video
sources while still viewing the video on the VIA! Each of these over-
lays is custom built and assigned in programming. See VIA!TOOLS
Help file for more specifics.
Cleaning
To clean the VIA!Valet100EM’s screen, first use a soft dry cloth to
remove contamination. If dirt is still present, use a damp cloth that
has been squeezed of excess water. If dirt is still present, then use a
non-abrasive cleaner or detergent to clean the screen. Use of strong
chemicals and/or some cleaning agents may discolor the polyester
film that makes up the touch screen.
The following products have been tested and approved for cleaning
VIA! Touch Panels:
Windex Glass Cleaner® , Formula 409® Cleaner , and Mr.
Clean® .