3-way focused sound field
2nd order custom “Q” @ 250 Hz and 3 kHz
NA
Pivoting .75" (19mm) cloth dome,
neo magnet
8" mineral-filled polypropylene cone, inverted butyl
rubber surround, pincushion-stamped steel basket
2.5" mineral-filled polypropylene cone
42 Hz - 20 kHz
88db
6 Ohms
100 W
12-1/8" (Diameter)
11-1/4" (Diameter)
7"
3-way focused sound field
2nd order custom “Q” @ 250 Hz and 3 kHz
EQ switch (bright, neutral, warm)
Pivoting .75" (19mm) open silk dome,
neo magnet
8" Graphite-reinforced polymer cone, inverted butyl
rubber surround, pincushion-stamped steel basket
2.5" injected Graphite polymer cone
40 Hz - 20 kHz
89db
6 Ohms
120 W
12-1/8" (Diameter)
11-1/4" (Diameter)
7"
3-way focused sound field
2nd order custom “Q” @ 300 Hz and 4 kHz
EQ switch (bright, neutral, warm), bass limiting
Pivoting .75" (19mm) woven Kevlar dome,
neo magnet
8" woven Kevlar fiber cone, inverted butyl rubber
surround, cast aluminum basket
2.5" woven Kevlar cone
35 Hz - 22 kHz
90db
6 Ohms
125 W
12-1/8" (Diameter)
11-1/4" (Diameter)
7"
System Type
Crossover
Switches
Tweeter
Woofer
Midrange
Freq. Response
Sensitivity
Impedance
Rated Power
Frame
Cutout
Mounting Depth
THP801C
Front Stage
In-Ceiling Speakers
3-way dipole
2nd order custom “Q” @ 300 Hz & 6 kHz
EQ switch (bright, neutral, warm), phase
2 x .75" woven Kevlar dome, fluid
cooling, rear wave damping, neo magnet
6.5" woven Kevlar fiber cone, rubber
surround,cast frame
2 x 2.5" woven Kevlar fiber cone, rubber
surround, neo magnet
50hz - 22 kHz
87db
6 Ohms
75 W
8-3/8"(W) x 15-7/16"(H)
7-1/4"(W) x 14-3/8"(H)
4"
System Type
Crossover
Switches
Tweeter
Woofer
Midrange
Freq. Response
Sensitivity
Impedance
Rated Power
Frame
Cutout
Mounting Depth
2-way dual woofer, MTM design
3rd order custom “Q” and slope @ 2.4 kHz
EQ switch (bright, neutral, warm), bass limiting
Pivoting 1" woven Kevlar dome, fluid cooling,
rear wave damping, neo magnet
2 x 5.25" woven Kevlar fiber cone, aluminum
phase plug, neo magnet, cast frame
N/A
55 Hz - 20 kHz
88db
6 Ohms
90 W
8-3/8"(W) x 15-7/16"(H)
7-1/4"(W) x 14 3/8"(H)
4"
2-way dual woofer, MTM design
3rd order custom “Q” and slope @ 2.2 kHz
EQ switch (bright, neutral, warm), bass limiting
Pivoting 1" woven Kevlar dome, fluid cooling,
rear wave damping, neo magnet
2 x 6.5" woven Kevlar fiber cone, aluminum phase
plug, large voice coil, dual magnet, cast frame
N/A
40 Hz - 20 kHz
90db
6 Ohms
110 W
9-7/8"(W) x 16-3/8"(H)
8-5/8"(W) x 15-3/16"(H)
4"
System Type
Crossover
Switches
Tweeter
Woofer
Midrange
Freq. Response
Sensitivity
Impedance
Rated Power
Frame
Cutout
Mounting Depth
Front Stage
In-Wall Speakers
Note: Installation of the THP801C, THP802C & THP803C requires a minimum ceiling joist height of 6 inches.
Surround
In-Wall Dipole
THP650D
THP802C
THP803C
THP525W
THP650W
Note: The THP650W cannot be installed horizontally in a standard 16 inch off-center stud bay.
THB_REVD 3/26/07 3:27 PM Page 6
