Elan ER450, Руководство пользователя, Страница: 17 / 24

17
Swap the position of the top hinge pin
bracket. On some models only the pin is
relocated, not the entire bracket.
If you're changing a two door Elan, slide
the top door back into position.
If you're changing a two door Elan, fit the
central hinge pin on the opposite side
from which you removed it. Note: some
hinge pins are fixed on the front of the
Elan, not the side.
10
9
8
Slide the (bottom) door back into position.
Fit the door by replacing the bottom feet
on the opposite sides from which you
removed them. On models with no
adjustable foot, please take care that the
foot is put back the right way round, with
the screw position pointing towards the
back of the cabinet.
Stand your Elan upright. Check that each
of the doors open properly and align with
the cabinet. Check that the magnetic seals
fit snugly all round and there are no gaps.
If adjustment is required lay it on its back
again and adjust the two screws in the
top hinge pin, shown in step 8 above.
On underworktop models, the only
adjustment that can be made is with the
‘foot plates’
Note: Models ci653 and ci758 have door
handles and blanking plugs for the opposite
side which have to be removed and
relocated on the opposite side of the door.
Leave your Elan upright for 2 hrs before
switching it on, to allow the coolant
liquid time to settle.
14
13
12
11
250, 450, & 550
455, 550, & 555
550
These models have just a pin (not a removable
plate). Pull out the pin.
FREEZER
LARDER
REFRIGERATOR