EL-4KHDBT-TXRX-40-IRS
USER MANUAL
06
www.elanhomesystems.com
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the
source to find out what audio and video resolutions are supported by the display, from this information the source will discover what the
best audio and video resolutions need to be outputted.
While the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure, issues do arise when
multiple displays or video matrix switching is introduced because of the increased number of variables.
By pre-determining the video resolution and audio format of the source and display device you can reduce the time needed for EDID hand
shaking thus making switching quicker and more reliable.
Configuration of extender EDID settings can be achieved using the product dip-switches on the end of the EL-4KHDBT-TX-40-IRS. EDID
dip-switch settings are shown below.
Note:
You must power cycle the product after making EDID changes. For some sources it may be necessary to power cycle the source
after EDID changes have been made for the source to update its video & audio output settings.
EDID Control
DIP ON ▼/OFF▼ SWITCHING POSITIONS
EDID TYPE
3
2
1
0
OFF
OFF
OFF
ON
1080p/2.0CH
OFF
OFF
ON
OFF
1080p/5.1CH
OFF
OFF
ON
ON
1080p/7.1CH
OFF
ON
OFF
OFF
1080i/2.0CH
OFF
ON
OFF
ON
1080i/5.1CH
OFF
ON
ON
OFF
1080i/7.1CH
OFF
ON
ON
ON
4K60Hz 4:2:0/2.0CH
ON
OFF
OFF
OFF
4K60Hz 4:2:0/5.1CH
ON
OFF
OFF
ON
4K60Hz 4:2:0/7.1CH
ON
OFF
ON
OFF
4K30Hz 4:4:4/2.0CH
ON
OFF
ON
ON
4K30Hz 4:4:4/5.1CH
ON
ON
OFF
OFF
4K30Hz 4:4:4/7.1CH
ON
ON
OFF
ON
DVI 1280x1024
ON
ON
ON
OFF
DVI 1920x1080
ON
ON
ON
ON
DVI 1920x1200
OFF
OFF
OFF
OFF
Copy EDID
Global EDID settings
Dip-switch position ‘0’ = Off
Dip-switch position ‘1’ = On
RS232
HDMI In
HDMI Out
Link
Link
Rx Tx
IR
Transmitter
L/R Coaxial
Out
Link
Power
EDID
HDBT Out
DC 12V
HEX70ED-TX-V2
MODE