2 of 6
I
NSTALLATION
O
VERVIEW
1. Mount the PC4401 inside the MAXSYS panel, and connect the PC4401 to the controller
according to the DSC documentation.
2. Install and setup the security system.
3. Run a Cat5 wire from the
g!
system to the security panel and test the cable.
4. Test the security panel, zone sensors and keypads for functionality.
5. Connect
the
g!
system to the panel electrically.
6. Configure
the
g!
system controller communication device and security panel and confirm
communication between the panel and the
g!
system controller.
7. Fault all the zones in the system. Faulting the zone sends a message to the
g!
system which
then automatically adds the zone in the Configurator. Zones that can’t be easily faulted must be
added by hand. Confirm that all zones are visible in the Configurator, and then provide names
for each zone and partition with the Configurator.
8. Test the arming and disarming capability from a computer or touch screen and confirm history
function.
