5
DMX Mode
Operating through a DMX controller gives the user the freedom to create their own programs tailored to
their own individual needs. This function also allows you to use your units as spot lights.
Touch Buttons
There here are four touch buttons under the LED display: Menu,
Up, Down, Enter. Normally, the LED will display the current DMX
address code of the fixture. At this time, presses up and down to
choose the functions you want.
LED Operation Menu
LED screen with four touch buttons: MENU, UP, DOWN and ENTER.
Press MENU to return to the upper menu; Press UP or DOWN to scroll into the menu options or to adjust
the values. Press ENTER to confirm.
After power on and initialization, it will show the status before last power off. Then, the unit is ready for set-
ting and working. Please see the following table for setting information.
1. This function will allow you to control each individual unit’s traits with a standard DMX 512 controller.
2. The LED suit uses 3/4/6DMX channels to operate. Please see “DMX Values and Functions” for the
DMX traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX con-
troller. Set your desired DMX address following the setup specifications that come with your DMX
controller.
LED Display
Main Menu
Value
Functions
d001
001-511
5 channels mode
A001
001-511
9 channels mode
cF50
01-99
Fade scroll
CC50
01-99
Snap scroll
c550
01-99
1-9:Red,11-19:Green,21-
29:Blue,31-39:White, 41-49:Am-
ber,51-59:Blue+Amber,61-69:Re-
d+Green,71-79: Red+Blue, 81-89:
Red+Amber, 91-99: Green+Blue
r00
0-255
Red intensity
9000
0-255
Green intensity
6000
0-255
Blue intensity
E000
0-255
White intensity
Y000
0-255
Amber intensity
dEno
/
Auto run
