ELAN DIGITAL SYSTEMS USBscope50, Руководство пользователя

Страница: 8 / 34

2.3 Using More Than One USBscope50
2.3.1 Stacked Mode
A unique feature of the USBscope50 architecture is that up to 4
devices
6 can be stacked to make a multi-channel instrument.
In order to use a stacked configuration, you will need to use the
connectors supplied with the USBscope50 unit.
You should have a pair of connectors supplied with each unit, one
long one and one short one, similar to these:
2.3.1.1 Assembling The Stack
To stack the USBscope50 devices, first be sure that none of them are
connected to a USB port.
Before you begin, put the short lead connectors to one side…you’ll
only need one of these.
Now, insert one of the long connectors from the top of one of the
scopes (it doesn’t really matter which one). Push the pins of the
connector into the top of the stacking connector from the side where
you can see the top of the black connector down inside the scope.
Be careful when doing this, don’t use too much force or you may
damage the connector pins. Push the long connector all the way in
until it seats down on the scope’s internal connector. You should be
6
Don’t stack more than 4, the software will reject this.
Elan Digital Systems Ltd.
8
USBscope50 USER’S GUIDE Iss8