PB62-S 6 Outlet Surge Protector with USB Setup Guide
①
Dual USB Charging Ports: 5V 2.4 Amp Total USB-A ports for charging compatible devices
②
PROTECTED LED—If illuminated, the unit is working properly. If not illuminated your connected
equipment is not being protected. Contact ELAC Customer Support
③
AC Outlets—Plug Equipment directly into these outlets. Do not use an extension cord, UPS, or
power strip.
①
③
②
PRODUCT FEATURES
USING YOUR SURGE PROTECTOR
1.
Ensure the power is off on the devices you will connecting to the AC outlets on the surge protector.
2. Plug the surge protector into a properly grounded AC wall outlet.
3. Check that the PROTECTED blue LED light is illuminated. (If not the surge protector is not operating properly and will not
protect your connected devices).
4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.
5. USB devices can be charged/powered by simply connecting the USB power cord to USB ports on the surge protector. The
USB ports deliver 5V and up to 2.4amps of power.
•
RISK OF ELECTRIC SHOCK – Use only in dry locations and only
indoors.
•
DO NOT plug into another relocatable power tap.
•
DO NOT “daisy chain” surge protectors.
•
DO NOT plug into 220V outlet or power source
•
DO NOT use with any aquarium equipment.
•
DO NOT connect to an ungrounded outlet
•
DO NOT install this device if there is not at least 30 feet (10 meters),
or more of wire between the electrical outlet and electrical service
panel.
•
This device features internal protection that will disconnect the
surge protective component at the end of its useful life
(PROTECTED LED WILL TURN OFF) , but will maintain power to
outlet – WHICH WILL BE UNPROTECTED. If you don’t want your
equipment at risk, the surge protector will need to be replaced.
•
DO NOT use in any circumstance that would affect the operation or
reliability of life support equipment, any medical applications, or
patient care.
SAFETY INFORMATION
TECHNICAL SPECIFICATIONS
Number of Outlets
6
Number of USB Ports
2—5V total 2.4A
AC Outlets
All 6 filtered with surge protection
Protection Modes
L-N, L-G, N-G
Thermal Fuse
Yes
Maximum Current
15 Amps
Line Voltage
120V @ 60Hz
Certification
UL 1449, UL 498A, FCC, ICES
Max Energy Dissipation
540 Joules
Max Spike Voltage / Current
6,000V / 36,000A
Response Time
1 Nanosecond
Filtration
EMI / RFI 40dB
ELAC AMERICAS INC.
1938 N. BATAVIA ST. SUITE K
ORANGE, CA 92865
Copyright 2021 ELAC Americas Inc.
