EL EL-IR100-22, Инструкция по эксплуатации, Страница: 5 / 9

04
How to fill water:
Steam ironing:
Make sure the iron is turned off and the AC Power Cord is
unplugged from the electrical outlet. The iron can be filled
with the Detachable Water Tank in place or removed. Set
the Cord Switch to “Cordless” Remove the iron from the
stand.
1. Set the steam control to the minimum position. (no steam)
(fig 6)
2. Set the position switch to position (fig 2) and
take cordless iron off from the power base.
3. Please pull out the water cover of the water tank.
4. Pour the water into the water tanks using the provided
measuring cup (fig 7).
NOTE:
Most tap water can be used in this iron. Do not use water
additives or substitute water such as linen or scented water
in the steam iron, they can stain fabrics or damage the iron.
Do not fill the water more than the “MAX” position
Spraying:
Press the spray button (fig 8), water will be sprayed out from
the spray nozzle. No spray if there is no water in the tank.
1. Please make sure that there is enough water in the water tank.
2. Turn the steam control to minimum position (fig 6) and
set the temperature control at the “…” or MAX position
(fig 9).
3. Insert the power plug into the socket.
4. After the power lamp goes off, turn the steam control to
the appropriate position (fig 10).
5. Please start steam ironing when the steam comes off.
Dry ironing:
Turn the steam control to minimum position (fig 6), set the
temperature control to the appropriate position, dry ironing is
ready.
Bursting steam:
Set the temperature control at the “…” or MAX position, then
press down the burst steam button (fig 11), the soleplate will
burstout the bursting steam.