EL.MO. Spa PREGIO Series, Руководство пользователя, Страница: 6 / 24

6
Fri01/09/17 9:00
Welcome
Area 1
SECTORS SELECTION
U U U
U U U
(default: 111111)
– Key in user code.
– Press OK .
Pre-arming mode starts. Sector keys of sectors proposed for
arming will start blinking (for the specific user in the current-
ly operating area).
– Press a sector key (S1, S2, S3, S4) to change the sectors
proposed (if authorised for the specific user).
The interval between the pressure of one key and the
following one must not be over 5 seconds otherwise
the system will arm.
Example
If sectors proposed for arming at the beginning are S1 and
S3
S1 S3 S4 S2
when you press key S2 (if authorised) also sector 2 will be
proposed for arming.
S1 S3 S4 S2
If you press key S2 again, sector 2 will be excluded from
sectors proposed.
– To change area, press arrow keys ↑ or ↓, then select sec-
tors to be armed.
– When finished, press OK to start arming, STOP to cancel
it.
– If exit time has been set, it will be marked by beep sounds:
leave the protected areas within the set time walking
through the path set.
At the end of exit time, sectors proposed will be armed (sec-
tor keys remains lighted unless the option Hide Arming Sta-
tus is enabled).
if one selected sector cannot be armed, the arming
procedure will be stopped.
2.4.4 system arming with sectors selection
- 8/16 sectors per area mode
Under 8/16 Sectors per area mode, sector keys are associat-
ed to sectors group .
Sector keys arm/disarm sector groups. The key-sectors as-
sociation is made during setup.
– Key in user code.
– Press OK .
Keys of sectors proposed for arming for a specific user will
blink in the currently operating area.
On the keypad display, a number / letter indicates that the
sector associated is proposed for arming (under 16 sectors
per area mode letters A to G represent sectors from 10 to
16); hyphens indicate sectors not proposed for arming.
8 Sectors mode
Area 1
Arm: 123--67-
16 Sectors mode
Area 1
123--67-9AB----G
During key blinking (pre-arming time, around 5s), it is possi-
ble to change sectors proposed either per single sector, or
per sectors group.
Per single sector:
Press a number key to change a single sector proposed (as
long as the sector selected is authorised for the user).
▼ 8 sectors mode
Press numeric keys from 1 to 8 .
▼ 16 sectors mode
Press numeric keys from 1 to 9 , * (= A), 0 (= B), # (= C).
The single sector selection is not available for D, E, F,
and G sectors.
If sectors proposed for arming at the beginning are number
1, 2, 3, 6, 7
Area 1
Arm: 123--67-
when you press key 8 also sector 8 will be proposed for
arming (as long as it is authorised for the user):