Information and product features herein are not binding and may be changed without prior notice.
EL.MO. Sp
a
| Via Pontarola, 70 | 35011 Campodarsego (PD) - Italy
Tel. +39 049 9203333 | Fax +39 049 9200306 | Help Desk +39 049 9200426 | www.elmospa.com | [email protected]
This device has been designed, built and tested with the utmost
care and attention, adopting test and inspection procedures in
accordance with current legislation. Full compliance of the working
specifications is only achieved in the event the device is used solely
for its intended purpose, namely:
Temperature screening and face recognition terminal
The device is not intended for any use other than the above and
hence its correct functioning in such cases cannot be assured.
Consequently, any use of the manual in your possession for any
purpose other than those for which it was compiled - namely for the
purpose of explaining the product’s technical features and operating
procedures - is strictly prohibited.
Production processes are closely monitored in order to prevent
faults and malfunctions. However, the componentry adopted is
subject to an extremely modest percentage of faults, which is
nonetheless the case with any electronic or mechanical product.
Given the intended use of this item (protection of property and
people), we invite you to adapt the level of protection offered by the
system to suit the actual situation of risk (allowing for the possibility
of impaired system operation due to faults or other problems), while
reminding you that there are specific standards for the design and
production of sy-stems intended for this kind of application.
We hereby advise you (the system’s operator) to see that the
system receives regular routine maintenance, at least in
accordance with the provisions of current legislation, and also
check on as regular a basis as the risk involved requires that
the system in question is operating properly, with particular
reference to the control unit, sensors, sounders, dialler(s) and
any other device connected. You must inform the installer know
how well the system seems to be operating, based on the
results of periodic checks, without delay.
Work involved in the
design, installation and maintenanceof systems incorporating this
product should beperformed only by personnel with suitable skills
and knowledge required to work safely so as to prevent any
accidents. It is vital that systems be installed in accordance with cur-
rent legislation. The internal parts of certain equipment are
connected to the power grid and therefore there is a risk of
electrocution when maintenance work is performed inside without
first disconnecting the primary and emergency power supplies.
Certain products include batte-ries, rechargeable or otherwise, as an
emergency backup power supply. If connected incorrectly, they may
cause damage to the product or pro-perty, and may endanger the
operator (explosion and fire).
User Manual
–
April
20
20
Edition
– Made in China
EU DECLARATION OF CONFORMITY
The product complies with current European EMC
and LVD directives.
The
full
text of the EU Declaration of Conformity is
available at the following Internet address:
www.elmospa.com
—
registration
is quick and easy
.
GENERAL WARNINGS
WARNINGS FOR INSTALLERS
Comply strictly with current standards governing the installation of
electrical systems and security systems, and with the manufacturer’s
directions given in the manuals supplied with the products.
Provide the user with full information on using the system installed and
on its limitations, pointing out that there are different levels of security
performance that will need to suit the user’s requirements within the
constraints of the specific applicable standards. See that the user looks
through the warnings given herein.
WARNINGS FOR USERS
Check the system’s operation thoroughly at regular intervals, making sure
the equipment can be armed and disarmed properly.
Make sure the system receives proper routine maintenance, employing
the services of specialist personnel who meet the requirements prescri-
bed by current regulations.
Ask your installer to check that the system suits changing operating con-
ditions (e.g. changes in the extent of the areas to be protected, change
in access methods, etc...)
FUNDAMENTAL SAFETY RULES
The use of the device is forbidden for children and unassisted disabled
individuals.
Do not touch the device when bare footed, or with wet body parts. Do
not directly spray or throw water on the device.
Do not pull, remove or twist the electric cables protruding from the devi-
ces even if the same is disconnected from the power source.
DISPOSAL WARNINGS
IT08020000001624
In accordance with Directive 2012/19/EU on waste electrical and electro-
nic equipment (WEEE), please be advised that the EEE was placed on the
market after 13 August 2005 and must be disposed of separately from
normal household waste.