ekwb Vector 2 FTW3 RTX 3080/90 ABP Скачать руководство пользователя | Manualshive

Страница: 14 / 17

background image

- 14 -

INSERTING THE GRAPHICS CARD INTO THE CHASSIS

Carefully lift your graphics card with the installed water block and
insert it into your PC’s motherboard PCI express expansion slot.
Please keep in mind that your graphics card is heavier than before it
was equipped with the water block.

You need to be very careful when handling the graphics
card. Avoid all unnecessary manipulation of the water block
assembly that might damage your card or water block.

FITTINGS AND TUBING

STEP 1

Screw-in two (2) G1/4 threaded male fittings. Attach the liquid
cooling tubes and connect the water block to the cooling loop.

Do not forget to plug the remaining two openings using
the enclosed EK-Plug G1/4 or its equivalent.

EK recommends using EK fittings with all EK water blocks.

CAUTION: When using connectors other than EK fittings,
pay special attention to the length of the fittings’ male G1/4”
thread – 5mm is the maximum G1/4” thread length allowed!

STEP 1

TUBING

EK- PLUG G1/4

EK-FITTING

For this step, you will need:

EK-Loop Multi Allen Key

«
...
12
13
14
15
16
...
»

Содержание Vector 2 FTW3 RTX 3080/90 ABP


















Отзывы:

Нет отзывов

Похожие инструкции для Vector 2 FTW3 RTX 3080/90 ABP

Бренд: Farallon Страницы: 26

Бренд: Observint Страницы: 11

Бренд: Rane Страницы: 4

Бренд: Profile Страницы: 6

Бренд: Hama Страницы: 12

Бренд: TP-Link Страницы: 2

Бренд: peplink Страницы: 2

CloudGen Firewall

Бренд: Barracuda Страницы: 8

Бренд: Uctronics Страницы: 12

NexXxoS GPX-N 1070-M08

Бренд: Alphacool Страницы: 4

Бренд: iTON Страницы: 12

Бренд: Adeunis RF Страницы: 9

Бренд: protech Страницы: 110

Бренд: StarTech.com Страницы: 4

Бренд: Panasonic Страницы: 2

Panaboard UB-5310

Бренд: Panasonic Страницы: 4

Panaboard UB-5310

Бренд: Panasonic Страницы: 2

TY-FB11DD - Monitor Terminal Expansion Board

Бренд: Panasonic Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды